Call now: 989-300-1334

Mid-Michigan · TCIA-Certified

Specialized rigging operations.

TCIA Tree Climbing Specialist + Rigging in Arboriculture. When the tree can't be dropped whole — too close to a house, too big, too awkward, or all three — we rig it down piece by piece with the same crew that does our removals.

What it costs

Specialized rigging is scoped per tree based on size, complexity, and how many pieces the tree needs to come down in. Mid-Michigan rates below.

Single tree, basic piece-down: $750–$1,500Typical tree-on-structure rigging: $1,500–$2,500Complex multi-stem or large trunk: $2,500–$5,000+

What counts as specialized rigging

When the easy way isn't an option.

🏠

Tree on a house or garage

The tree is on (or against) the structure. Controlled piece-by-piece off the roof, the eave, or the wall — never one big lift that makes the damage worse.

🏘️

Tight urban lots

Precision dismantle where street access is narrow and adjacent structures are close. Manual rope-and-pulley rigging handles what larger equipment can't reach.

🏊

Poolside or over landscaping

Every piece rigged to avoid the target — pool, koi pond, finished patio, garden bed, the deck the homeowner spent last summer building. Nothing free-falls onto what's underneath.

🌳

Complex multi-stem trees

Split-trunk or codominant stems where one stem governs the cut plan. We stage the rigging so removing one stem doesn't destabilize the rest.

The rig

A 10-ton hand winch through a 10-ton block.

🪢

1-inch bull rope, 200 feet

Long enough for one setting on tall backyard trees without resetting partway down. The primary line on most jobs.

⚙️

10-ton snatch block

Redirects load around corners — useful when the only safe landing zone is forty feet off the trunk. Doubles as a redirect and a force multiplier.

⚙️

10-ton hand winch

Pulls heavy trunk sections through the air when friction alone won't move them. Multi-ton mechanical advantage on a hand-cranked line.

🪢

Hitch-pulley systems

Mechanical advantage — one hand on the descent line controls a 400-pound log. Standard friction-hitch setup with a redirect.

📐

Load-rated slings & blocks

Each piece rated and inspected before it goes in the air. Redundancy built into the system, not bolted on.

How we work

Walk, set, section, haul.

  1. 01

    On-site walk

    Assess the tree, the fall zone, the targets, and the access path. We walk the property with you, flag what we'd do, and quote the job on the spot.

  2. 02

    Set the rigging

    Primary line at the top of the tree using the 1-inch bull rope, secondary friction-hitch system as backup, the 10-ton snatch block where the line needs to change angle. The 10-ton hand winch goes in below. Every piece of hardware load-rated and inspected.

  3. 03

    Section it down

    Top first, upper limbs next, trunk sections in pieces sized for the rigging line. Every piece comes down on rope — never a free fall onto a target.

  4. 04

    Buck + haul

    Firewood rounds stacked where you want them or hauled off. Brush carried out by hand. Site broom-clean before we leave.

When to call

If any of these sound like your job, we're the call to make.

🏠

Tree on a structure

House, garage, shed, or outbuilding. The tree is in or on the structure, and the priority is getting it off without making the damage worse.

📏

Tree inside a tight fall zone

Targets on more than one side. No safe direction to drop. The cut plan has to control where every piece goes.

🏊

Tree over a pool, garden, or finish landscape

Anything you don't want a 400-pound log landing on. We rig it; nothing falls.

🚪

Suburban lot with limited street access

Low wires, narrow street, soft ground, HOA rules. The big gear says no; manual rigging says yes.

FAQ

Specialized rigging questions, answered.

What is specialized rigging?

Piece-by-piece dismantling with every cut controlled by rope on a friction-hitch system. Apical's setup — 1-inch bull rope, 10-ton snatch block, 10-ton hand winch, and hitch-pulley systems — gives us enough mechanical advantage to move heavy trunk sections through the air with a hand on the line, one controlled cut at a time.

What's the difference between this and a regular removal?

Rigging operations are piece-by-piece, with every cut controlled by rope on a friction-hitch system. Standard removals can sometimes be dropped whole or in a few large pieces. When a tree can't be dropped whole — too close to a house, too big, too awkward — that's when specialized rigging operations are the right call.

Do you bring your own gear?

Yes. We carry our own 1-inch bull rope, 10-ton snatch block, 10-ton hand winch, hitch-pulley systems, and redundant rigging hardware — all rated and inspected. We don't rent gear per job; we own it and maintain it.

How much does it typically cost?

Depends on the size of the tree, the complexity of the rigging plan, and how many pieces the tree needs to come down in. Specialized rigging is usually comparable to or slightly more than a standard removal of the same tree. Free on-site estimate.

Can a manual rigging setup really lift heavy trunk sections?

Yes. A 10-ton hand winch through a 10-ton snatch block gives multi-ton mechanical advantage. The pieces that come down are sized to match what the rigging can safely hold. The winch does the heavy lifting — your hands just guide the line.

Do you coordinate with my roofer or restoration company?

Yes. We're used to being part of the chain on tree-on-structure work. Happy to be subcontracted to a general contractor or roofer managing the job, and we provide photo-supported invoices for claims.

Got a tree that needs rigging down?